BNBM Yuwang waterproof coating series products can be divided into polymer waterproof coating, polymer modified asphalt waterproof coating and polymer cement waterproof coating.
WATERPROOF COATING SERIES
Special Waterproof Coating for Metal Roof
Waterproof coating ranges
★ Product Description download
According to the use performance, it can be divided into two types: normal type and heat reflection type.
Product Classification:
————
Special waterproofing coating for metal roofing is made of self-crosslinking acrylic waterproofing emulsion and filler. It is specially designed for coating on metal surface. It can be combined with woven polyester fabric to form the joints, joints and perforations of metal roofing. The complete waterproof system provides a perfect solution to solve the congenital leakage of metal roofing. At the same time, the coating material has fatigue resistance, aging resistance, low temperature flexibility and flexibility, which are completely suitable for open air environment and metal characteristics.
PRODUCT
INTRODUCTION
1.Do not work below 5 ° C or in the rain.
2.After construction, before drying and film formation, care should be taken to avoid strong sunlight exposure, and rainwater erosion should be avoided.
Precautions:
Base treatment of each part:
Lap joint: Apply the primer coating, spread the 15~20cm wide sewed polyester cloth on the lap joint, and then fully coat and infiltrate with the primer coating.
Lap joint: Apply the primer coating, spread the 15~20cm wide sewed polyester cloth on the lap joint, and then fully coat and infiltrate with the primer coating.
Raised/firmware: chimney, vent, fan port, etc., need to paint around, spread the size and shape of the woven polyester cloth, paint on the cloth and fully infiltrate, to ensure that Bubble, no wrinkles.
Gutter: Gutters, seams, etc. need to be treated locally, and then painted, consistent with the above.
Brush the heat reflective coating:
After the base layer treatment of each part is done, apply one to two heat-reflective metal roofing special waterproof coatings in the waterproof area, and the coating thickness should not be <0.5mm.
Reference dosage: 1.0mm thick coating film, the total amount of coating is about 1.8 ~ 2.0kg / m2.
Construction process:
The waterproof part is determined:
Metal panel lap joints, intersections with the parapet wall, fan joints, protruding roof ducts, air conditioning ducts, lighting panels, roof ridges, gutters, rivet firmware and other weak parts.
Waterproof parts treatment:
A. Requirements: Ensure that the metal roof panel is firm and the waterproof parts are free of dirt and dirt.
B. Treatment: If necessary, replace or add firmware, grind the dirt and dirt, remove dust and other dirt, until the metallic color is present, and then apply primer.
CONSTRUCTION METHOD
CONSTRUCTION
METHOD
CONSTRUCTION
Tensile strength retention rate/%≥80
Elongation at break/%≥100
Artificial weathering treatment
Tensile strength retention rate/%≥80
Elongation at break/%≥100
Acid treatment
Tensile strength retention rate/%≥80
Elongation at break/%≥100
Immersion treatment
ensile strength retention rate/%≥80
Elongation at break/%≥100
Heat treatment
Normal type----
Thermal reaction type≥0.8
Hemispheric emissivity
Normal type----
Thermal reaction type≥0.8
Solar reflectance (white)
Normal type----
Thermal reaction type<20
Stain resistance (white or light)/%
Normal type≥0.3
Thermal reaction type≥0.3
Peeling cohesiveness (N/mm)
No cracking, no separation from the substrate
Low temperature bending/°C
No blistering, flaking, cracking
Heat resistance/ °C
≤15
Water absorption rate/%
≥65
Solid content /%
Normal type≥12
Thermal reaction type≥12
Tear strength/(N/mm)
Normal type≥150
Thermal reaction type≥150
Elongation at break /%
Normal type≥1.5
Thermal reaction type≥1.5
Tensile strength / MPa
Physical Index
JG/T375-2012《Acrylic High Elastic Waterproof Coating for Metal Roof》
STANDARD
EXECUTIVE
0.3MPa,120min,impermeable
Water impermeability
It is mainly used for waterproofing of roof and wall of steel structure factory.
SCOPE OF APPLICATION
From Monday to Saturday at 8:00am -18:00pm
Email :wugang@bnbm.com.cn
Address: South of Xingyou Street, West of Jinger Road, Xinglongtai District, Panjin City, Liaoning Province, China
400-600-0427
Contact us
Hydro power
Municipal building
Commercial building
Civil building
Bridge, tunnels and roads
Overseas engineering
Rail roads and subways
Major projects
Classical engineering cases
Waterproof coating ranges
Excellent and Secure Waterproofing System Ranges
Polymer ranges of waterproof materials
Self adhering ranges of modified asphalt waterproof membrane
Hot-torched ranges of modified asphalt waterproof membrane
Products center
Development history
Honor
Enterprise culture
Production bases
Company introduction
Enter BNBM Yuwang